dated : 12/12/20 03 semtech electronics ltd. ( subsidiary of semtech internati onal holdings limited, acompany listed on the hong kong stock exchange, stock code: 724 ) ? rl1601 thru rl1607 glass passivated silicon rectifiers reverse voltage ? 50 to 1000 volts forward current ? 16.0 amperes features ? low forward voltage drop ? high current capability ? high capability ? high surge current capability mechanical data ? case: molded plastic, to-220a ? terminals: leads solderable per ? mil-std-202, method 208 guaranteed ? polarity: as marked ? mounting position: any absolute maximum ratings and characteristics dimensions in mm ratings at 25 o c ambient temperature unless otherwise specifi ed. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. symbols rl 1601 rl 1602 rl 1603 rl 1604 rl 1605 rl 1606 rl 1607 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 volts maximum rms voltage v rms 35 70 140 280 420 560 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 volts maximum average forward rectified current 0.375?(9.5mm) lead length at t c = 100 o c i (av) 16.0 amps peak forward surge current 8.3ms single half -sine-wave superimposed on rated load (jedec method) i fsm 250 amps maximum forward voltage at 16.0a dc and 25 v f 1.1 volts typical junction capacitance (note1) c j 100 pf typical thermal resistance (note2) r 0jc 2.0 /w @t c = 25 o c 10 amps maximum reverse current at rated dc blocking voltage @t c =125 o c i r 250 amps operating and storage temperature range t j ,t s -55 to +150 o c notes :1. measured at 1 mhz and applied reverse voltage of 4.0 vdc. 2. thermal resistance from junction to case mounted on heatsink. case negative suffix "r" case positive pin 1 pin 2 case pin 2 pin 1 case
dated : 12/12/20 03 semtech electronics ltd. ( subsidiary of semtech internati onal holdings limited, acompany listed on the hong kong stock exchange, stock code: 724 ) ? rl1601 thru rl1607 0.1 instantaneous reverse current. ( a) 0.2 instantaneous forward current. (a) 1000 junction capacitance. (pf) reverse voltage. (v) 1 20 0 510 50100 500 1.2 fig.5- typical junction capacitance forward voltage (v) 60 40 80 120 100 0.1 0.6 0.8 1.0 t j =25c 1.4 1.6 1.8 2.0 percent of rated peak reverse voltage. (%) fig.5- typical junction capacitance 60 020 40 80 100 120 140 peak forward surge current. (a) 200 average forward current.(a) 150 1 0.4 4 2 40 20 10 200 100 t j =25c pulse width=300 s 1% duty cycle fig.3- typical instantaneous forward characteristics case temperature.(c) 400 8 0 50 12 10 14 100 40 t j =25c t j =125c 2 0.4 0.2 1.0 10 4 number of cycles at 60hz fig.4- typical reverse characteristics 0 100 12 5 100 50 150 10 20 50 100 8.3ms single half sine wave jedec method fig.1- maximum forward current derating curve 18 16 fig.2- maximum non-repetitive forward surge current 250 300 single phase half wave 60hz resistive or inductive load
|
